Launch the app from your phone's home screen
Once you have the Clarius App loaded to your smart device, remove the battery saver tab and insert fully. The scanner light will flash blue, then green, and then off; the scanner is on standby waiting for the App to start.
It will take about a minute for your claimable scanner to appear in the App.
Once you claim your scanner, you will be prompted by the App to create a new institution or select an institution that is already connected with your account.
Select your new scanner from the list.
When the status wheel is
complete, the Clarius App is
connected to the Scanner.
You will see a pop-up at the bottom of your screen with instructions.
Go to Wi-Fi Settings on your smart device
Select the Scanner’s Wi-Fi Direct Network
Press and hold the password field for 2 seconds to paste the stored password and press join
Return to the Clarius App.
Your Android smart device will attempt to connect directly with your scanner. If it doesn’t, follow these instructions:
- Go to Wi-Fi Settings on your smart device
- Select the Scanner’s Wi-Fi Direct Network
- Press and hold the password field for 2 seconds to paste the stored password and press join.
Select Exam Type from List
Enter Patient Demographics or skip to the next step
Press the Snowflake button for the live imaging screen
Important Tip for Future Connections
If there are no other Wi-Fi networks where you are scanning, the connection to the Scanner's Wi-Fi will happen automatically.
To start using another scanner with your smart device, go back to Settings and select its Wi-Fi Direct network.
To scan while connected to the Internet, select your local Wi-Fi network from Settings. Image performance may vary depending on your router configuration. You will need to connect to local Wi-Fi to save your images.